Dynatech MP-7000 Dokumentacja Pobierz pdf (Strona 19)

Electrical Safety Analyzers

Key features

• Superior compliance with

multiple standards: IEC60601-

1(partial), IEC62353, VDE 751,

ANSI/AAMI ES1:1993, NFPA-99,

AN/NZS 3551, IEC61010

• Three test loads

• Expanded leakage ranges

through 10,000 µA

• Dual-lead resistance, leakage,

and voltage tests

• AC only, dc only and true-rms

leakage readings

• 100 % and 110 % mains volt-

age for mains on applied part

(lead isolation) test

• DSP ﬁlter technology for

improved accuracy in leakage

measurements

• 20 A equipment current

• More applied parts selections

• ECG and performance

waveforms

• Intuitive user interface

• Easy-to-use applied parts (ECG)

connections

• Insulation posts on applied

parts connections

• Five different insulation tests

• Varying insulation test voltage

500 V dc and 250 V dc

• 2- or (optional) 4-wire ground

wire resistance

• Large display with adjustable

contrast

• Ergonomic design

• Optional Ansur plug-in

software

• USB connection

• CE, C-TICK and CSA for USA

and Canada

• RoHS compliance

• Optional Ansur test automation

software to standardize testing

procedures, capture waveforms,

and print and document test

result

The ESA620 Electrical

Safety Analyzer repre-

sents the next generation

in manual, portable elec-

trical safety testers. With

selections of three test

loads, protective earth

test currents, and two

insulation test voltages

this versatile product

can be used worldwide

to enhance productivity

and test to standards of

choice.

New DSP technology offers better accuracy of leakage measurements

throughout the ranges specified in the standards.

Equipped with ten safety-enhanced ECG posts, the ESA620 offers

simulation of ECG and performance waveforms so both electrical safety

and basic tests on patient monitors can be performed with a single con-

nection. When used with optional Ansur computer-based software plug-in,

the ESA620 becomes automated. This allows for standardization of test

procedures, capturing and storage of results, comparison to standard limits,

and printing of reports thus enabling the sophisticated performance of the

high-end electrical safety analyzers.

Voltage

Range (mains voltage) 120 V model: 90 V ac to 132 V ac rms

230 V model: 180 V ac to 264 V ac rms

Accuracy ± (2 % of reading + 1 V)

Range (accessible voltage) 0 V ac to 300 V ac rms

Accuracy ± (2 % of reading + 2 LSD)

Voltage tests Mains, Accessible, and Point to Point

Earth resistance

Modes Two terminal or four terminal

Test current > 200 mA ac or 10 A ac to 25 A ac

Ranges

0 Ω to 2 Ω

Accuracy

± (2 % of reading 0.015 Ω)

Equipment current

Mode AC rms

Range 0 A to 20 A

Accuracy ± 5 % of reading ± (2 counts or 0.2 A, whichever is greater)

Leakage current

Patient load selection

(input impedance)

AAMI ES1-1993 Fig 1

IEC 60601: Fig 15

IEC 61010: Fig A-1

Crest factor ≤ 3

Ranges 0 μA to 199.9 μA

200 μA to 1999 μA

2.0 μA to 10.0 mA

Frequency response DC to 1 kHz

1 kHz to 100 kHz

100 kHz to 1 MHz

Accuracy ± (1 % of reading + 1 μA or 1 LSD, whichever is greater)

± (2 % of reading + 1 μA or 1 LSD, whichever is greater)

± (5 % of reading + 1 μA or 1 LSD, whichever is greater)

ESA620

Electrical Safety Analyzer

Specications

riešenia na presné meranie

http://www.elso.sk

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Komentarze do niniejszej Instrukcji

Brak uwag

Dynatech MP-7000 Dokumentacja Strona 19

Komentarze do niniejszej Instrukcji